This tool is used to expand 1 1/2" pipe. Used with arbor PKSA112

This tool is used to expand 1 3/4" pipe. Used with arbor PKSA112

This tool is used to expand 2" pipe. Used with arbor PKSA112

This tool is used to expand 2 1/4" pipe. Used with arbor PKSA112

This tool is used to expand 2 1/2" pipe. Used with arbor PKSA112

This tool is used to expand 3" pipe. Used with arbor PKSA112

This tool is used to expand 3 1/2" pipe. Used with arbor PKSA112

This tool is used to expand 4" pipe. Used with arbor PKSA112

All BendPak benders are built with 3" bending capacity so you can order three inch dies when you need them. Features * Gives BendPak benders the ability to bend 3" OD tubing * Four piece set comes complete with: * (2) BS-300 3" back shoes * (1) 5R-300 5" radius bending die * (1) SS-300 segment expander

This arbor is used with all current models of Ben Pak benders. It is used to expand pipe from 1 1/2" - 4"

Huth Square tubing dies will work on bend pak benders with the optional adaptor kit (pkdakit). Standard sizes range from 1/2"-2 1/2". Special sizes available. Call for a quote on all sizes.

This adaptor kit allows Huth dies to be used on Bend Pak benders. This includes round and square dies.

Includes Part #'s H798 and H801

This adaptor screws into the expander cylinder of the Bend Pak benders and allow for quick disconnect of the solid tool swagers.

These sleeves are used with your existing 3" expander to allow you to expand 3 1/2", 4" and 5" pipe. Part #'s:

H9001-35 $168.50

H9001-40 $168.50

H9001-50 $194.50

This tool is used to put 45 and 90 degree flares on pipe from 1 1/2" - 3".

Make your own header collectors with this tool from Huth Manufacturing. Just clamp the pipe into the bender and in a few seconds, you have your collector. These can be made from your scrap pipe that every shop has laying around. This tool is for making a 3" collector. To use this tool on the Bend Pak bender, an adapter is required, (PKDS-823)

This tool is used to put a 45 degree flare on pipe sizes 1 1/2" - 2 1/2". The tool increasing in size from the tip in toward the larger end of the tool. Simply place the pipe over the tip of the tool, activate the expander valve, and the tool catches the pipe and puts a nice 45 degree flare on the end. This helps in places where you already have your pipe bent and need to put a flare on it. Many times, you cannot clamp the pipe in the machine to use the swager end. This can be big time saver.

This tool is used to put a 45 degree flare on pipe sizes 2 1/2" - 3 1/2". The tool increasing in size from the tip in toward the larger end of the tool. Simply place the pipe over the tip of the tool, activate the expander valve, and the tool catches the pipe and puts a nice 45 degree flare on the end. This helps in places where you already have your pipe bent and need to put a flare on it. Many times, you cannot clamp the pipe in the machine to use the swager end. This can be big time saver.

This adapter allows Huth solid tool swagers to be used on the Bend Pak benders.

This handy tool allows you to expand either on the desktop or under the car. It attaches to shop air. It comes with 4 expanders which covers 1 1/2"-3". With optional expanders (H477 and H478) you can expand up to 4". With the H440 and H441 flare expanders, you can put 45 degree flares on pipe from 1 1/2"-3 1/2".